Filter Products
-
Add to cart
- Size: 20Kg
- Max Thickness: Wet Film Thickness of 0.3mm (1 coat)
- Coverage: 45m2/11Kg (2 coats)
- Can be applied to damp surfaces. Can be safely applied to freshly laid hardened (green) concrete.
- When applied directly to the substrate (dual coat system) the cured membrane will withstand 250kPa of hydrostatic pressure which is equivalent to a 25 metre head of water. Prevents rising damp and the formation of efflorescence
-
Add to cart
- Size: 20Kg
- Coverage: 1m2 at 10mm
- Ready to use, normal setting, controlled shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. Mix 1 x 20kg bag of Topcem Pronto with approximately 1.4 litres of water. Workability time of 40-60 minutes and light foot traffic after 12 hours.
- Ready for resilient and timber flooring installation after 4 days
-
Add to cart
- Size: 20Kg
- Coverage: 1m2 at 10mm
- Pre-blended, mortar for ready-to-use, quick setting and drying (24 hours), controlled shrinkage screeds. Mix 1 x 20kg bag of Mapecem Pronto with approximately 1.5-1.7 litres of water.
- Workability time of 20-30 minutes and light foot traffic after 2-3 hours. Ready for resilient and timber flooring installation after 24 hours
-
Add to cart
- Size: 20Kg
- Max Thickness: 15mm-50mm Bonded, 40mm-70mm Unbonded
- Pre-mixed and ready to use
- Rapid set cement screed preparation with Ardurapid fast dry technology. Designed for all types of floor coverings. Unbonded at least 35mm, and preferably 40mm thick. Maximum thickness is 70mm.
- Heated floors normally require greater than 45mm thick. Bonded screeds it must be at least 15mm and a maximum of 50mm
-
Add to cart
- Size: 20Kg
- Max Thickness: 15mm + Bonded, 35-40mm unbonded
- Coverage: 1m2 at 10mm
- Designed to be mixed with forced actioned Soroto mixer with desired aggregate
- Ardex A38 produces a screed that improves on-site efficiencies by allowing traffic shortly after application and laying of the floor covering on the same day
-
Add to cart
- Size: 20Kg
- Max Thickness: 10mm-100mm
- Coverage: 1m2 at 10mm
- Fast hardening levelling smoothing compound for thicknesses from 10mm to 100mm. Especially recommended for pumping. Used in interiors as a bulk-filling underlayment compound. Smoothing for underfloor heating systems
- When mixed with water, UC Leveller Maxi becomes a very fluid, easy to apply mix that has excellent self-levelling properties and cures rapidly. Flooring can be installed after approximately 24-72 hours