Filter Products
-
Add to cart
- Size: 15Kg
- 1.3Kg/m2 per mm of thickness
- Ready to use, ultraquick drying, flexible liquid membrane for internal and external waterproofing applications.
- The flexible nature of Mapelastic AquaDefense helps to withstand normal movements caused by expansion and shrinkage of the substrate due to temperature variations and vibration
-
Select options
- Size: 4L, 15L
- Max Thickness: Total dry film thickness of 0.5mm (2 coats)
- Coverage: Floors: 8.7m2 (2 coats) D.F.T - 1.0mm Walls: 17.5m2 (2 coats) D.F.T - 0.5mm
- Express dry time with bathroom tiling possible in just 4 hours, with no risk to corners and junctions. Crack isolation protection over shrinkage, hairline and other non-structural cracks. Tough flexible film.
- Meets Green Building Council of Australia Greenstar requirements IEQ-13, IEQ-11. Can be tiled over - good adhesion with Ardex tile adhesives. STB Tape eliminates need for bond breaker. Class III Membrane, as per AS/NZS 4858 Wet Area Membranes
Cementitious MaterialsArdex WPM155 Rapid Plus High Performance Undertile Waterproofing Membrane
-
Add to cart
- Size: 4Kg
- Consumption: 0.2-0.3kg/m2
- Two-component, solvent-free, 100% solid epoxy primer for consolidating and waterproofing cementitious substrates. Application prior to the installation of flooring sensitive to moisture and to alleviate moisture related problems of concrete or cementitious screeds. Can be applied to substrates up to 100% RH
-
Select options
- Size: 10L, 20L
- Consumption: 300-400ml/m2 per coat Two coats required for vapour barrier 100% RH
- Planiseal MR is an extremely versatile water based epoxy resin compound for use as a primer and protective coating to resist and prevent moisture transmission through mineral substrates. Suitable for applications directly over damp surfaces and freshly installed green concrete, screeds/cementitious toppings.
- Planiseal MR exhibits excellent positive and negative hydrostatic pressure resistance. Once cured, subsequent waterproofing membranes, adhesives and other finish coats can be applied
-
Add to cart
- Size: 20Kg
- Max Thickness: Wet Film Thickness of 0.3mm (1 coat)
- Coverage: 45m2/11Kg (2 coats)
- Can be applied to damp surfaces. Can be safely applied to freshly laid hardened (green) concrete.
- When applied directly to the substrate (dual coat system) the cured membrane will withstand 250kPa of hydrostatic pressure which is equivalent to a 25 metre head of water. Prevents rising damp and the formation of efflorescence
-
Add to cart
- Size: 20Kg
- Coverage: 1m2 at 10mm
- Ready to use, normal setting, controlled shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. Mix 1 x 20kg bag of Topcem Pronto with approximately 1.4 litres of water. Workability time of 40-60 minutes and light foot traffic after 12 hours.
- Ready for resilient and timber flooring installation after 4 days
-
Add to cart
- Size: 20Kg
- Coverage: 1m2 at 10mm
- Pre-blended, mortar for ready-to-use, quick setting and drying (24 hours), controlled shrinkage screeds. Mix 1 x 20kg bag of Mapecem Pronto with approximately 1.5-1.7 litres of water.
- Workability time of 20-30 minutes and light foot traffic after 2-3 hours. Ready for resilient and timber flooring installation after 24 hours