Cementitious Materials
Read More...Filter Products
Showing 25–36 of 69 results
-
Select options
- Sizes: 2kg Kit, 8kg Kit
- Coverage: 5-10m2/L onto non-porous concrete
- Solvent free, Non-flammable, Non-toxic & Non-explosive
- Ideal for use with Non-Porous Concrete, Sealed Concrete, Ceramic Tiles, Mosaic, Terrazzo, Wood & Metal Surface, Plastic Coatings & Paints
- Replacing any Neoprene Primer
- Dry Internal use only
-
Add to cart
- Size: 4L
- Coverage: 6-10m2/L
- Water based, low VOC and solvent free
- For use in both internal and external applications
- Improves adhesion to smooth, dense and non-porous substrates
- Can be used with selected Ardex tile adhesives, floor levelling compounds and undertile waterproofing membranes
-
Add to cart
- Size: 11Kg
- Coverage: 110m2/11Kg (1 coat)
- One-component polyurethane primer and green slab sealer. Suitable for internal and external use.
-
Add to cart
- Size: 254mL
- Coverage: Approx. 3 linear metres with a joint size of 3 x 25mm
- Fill interior control joints or new construction saw joints. Rapid cure time 90 minutes
-
Add to cart
- Size: 254mL
- Ultra-low viscosity - penetrates deep into cracks
- Suitable for internal & external use
- Rapid curing - Trafficable in under 20 minutes
- Coverage may vary depending on crack width and depth.
- Ready to use - no mixing required
-
Add to cart
- Size: 254mL
- Non sag - perfect for overhead and vertical repairs
- High strength - cures stronger than concrete (>55MPa)
- Full cure in 2 hours
- Works with Ardex Crack Clock
- Coverage: Approx. 6m with a joint size of 6x6mm
-
Add to cart
- Size: 15Lm x 75mm Roll
- For use as a bond breaker with approved Ardex water based liquid membranes
-
Add to cart
- Size: 40Kg Kit
- Max Thickness: Total dry film thickness on floors (2 coats): 1.2mm Total dry thickness on walls (2 coats): 0.8mm
- Spread Rate: 40Kg Kit covers approx.: Floors: 16m2 (2 coats) D.F.T - 1.2mm Walls: 24m2 (2 coats) D.F.T - 0.8mm
-
Select options
- Size: 4L, 15L
- Max Thickness: Total dry film thickness of 0.5mm (2 coats)
- Coverage: Floors: 8.7m2 (2 coats) D.F.T - 1.0mm Walls: 17.5m2 (2 coats) D.F.T - 0.5mm
- Express dry time with bathroom tiling possible in just 4 hours, with no risk to corners and junctions. Crack isolation protection over shrinkage, hairline and other non-structural cracks. Tough flexible film.
- Meets Green Building Council of Australia Greenstar requirements IEQ-13, IEQ-11. Can be tiled over - good adhesion with Ardex tile adhesives. STB Tape eliminates need for bond breaker. Class III Membrane, as per AS/NZS 4858 Wet Area Membranes
Cementitious MaterialsArdex WPM155 Rapid Plus High Performance Undertile Waterproofing Membrane
-
Select options
- Sizes: 4L, 20L
- Max Thickness: Wet Film Thickness of 0.3mm (1 coat)
- Coverage: Primer or efflorescence barrier: 60m2/20L kit, 12m2/4L kit (1 coat). Moisture Barrier: 30m2/20L kit, 6m2/4L kit (2 coats)
- Can be applied to damp surfaces. AS4020:2000 Potable Water Approved. Hydrostatic pressure resistant waterproof membrane. Prevents rising damp and formation of efflorescence.
- Water based- safe to use in sensitive locations. Green Star - meets the benchmark for VOC credit in the Green Building Council of Australia's Rating Tools
-
Add to cart
- Size: 20Kg
- Max Thickness: Wet Film Thickness of 0.3mm (1 coat)
- Coverage: 45m2/11Kg (2 coats)
- Can be applied to damp surfaces. Can be safely applied to freshly laid hardened (green) concrete.
- When applied directly to the substrate (dual coat system) the cured membrane will withstand 250kPa of hydrostatic pressure which is equivalent to a 25 metre head of water. Prevents rising damp and the formation of efflorescence
-
Add to cart
- Size: 24.8Kg Kit
- Max Thickness: Feather Edge up to 12mm
- Coverage: 12m2 at 1mm, 4m2 at 3mm
- Formulated with excellent adhesion. Works perfectly under a damp proof membrane. Able to be bulk filled 12mm-30mm with 2mm-5mm aggregate.