Cementitious Materials
Read More...Filter Products
Showing 37–48 of 69 results
-
Select options
- Sizes: 5Kg, 10Kg
- Coverage: 0.2-0.3 kg/m3
- Ready-to-use primer made from synthetic acrylic resin and silica sand
- Very low emission level of volatile organic compounds (VOC) for non-absorbent substrates
- Ideal for use as a bonding agent for cement renders, levelling compounds and screeds.
-
Add to cart
- Size: 20Kg
- Coverage: 3.5-4.5kg/m2 per cm of thickness
- Special binder for quick-setting and drying (24 hours), controlled shrinkage screeds. Mix one 20kg bag with 80-100 kg of 0-8mm graded aggregate. Add 4-8 kg of water according to moisture in the aggregate
-
Add to cart
- Size: 20Kg
- Coverage: 1m2 at 10mm
- Pre-blended, mortar for ready-to-use, quick setting and drying (24 hours), controlled shrinkage screeds. Mix 1 x 20kg bag of Mapecem Pronto with approximately 1.5-1.7 litres of water.
- Workability time of 20-30 minutes and light foot traffic after 2-3 hours. Ready for resilient and timber flooring installation after 24 hours
-
Select options
- Size: 11.3Kg, 22.7Kg
- Coverage: 1.6Kg/m2 per mm of thickness
- Fast setting smoothing patching compound for both interior and exterior applications. Ideal for use in elevation changes including ramping.
- Natural grey to blend in with existing concrete. Can be primed and covered with a levelling compound after minimum 2 hours.
-
Add to cart
- Size: 20Kg
- 1.5Kg/m2 per mm of thickness
- Waterproofing for indoor floor and water surfaces that are not continuously immersed in water or subject to rising damp. Flexible, anti-fracture membrane.
- Apply before the installation of ceramic tiles or stone material. MapeGum WPS is a ready-to-use, solvent-free, one-component, grey-coloured paste with a base of synthetic resins in water dispersion
-
Add to cart
- Size: 15Kg
- 1.3Kg/m2 per mm of thickness
- Ready to use, ultraquick drying, flexible liquid membrane for internal and external waterproofing applications.
- The flexible nature of Mapelastic AquaDefense helps to withstand normal movements caused by expansion and shrinkage of the substrate due to temperature variations and vibration
-
Add to cart
- Size: 10Kg
- Coverage: 100m2
- 1 coat system
- Moisture vapour barrier for cement-based substrates that are not subject to rising damp, but have a relative humidity content higher than the Australian Standard up to 95% RH (ASTM F2170 as per AS 1884:2012)
-
Add to cart
- Size: 10Kg
- Coverage: 40m2
- 2 coat system, 15 minute recoat time, 2-24hr levelling window
- 95% RH
- One-component, rapid drying PVDC based dispersion primer for suppressing residual moisture up to 4.5 cm-% (95% R.H)
-
Select options
- Sizes: 5kg, 20kg
- Max Thickness: 1-20mm
- Coverage: 1.6kg/m2 per mm of thickness
- Rapid drying with high bond strength
- Ideal for repairing, levelling & smoothing interior floors, walls, steps & rises
- Filling depressions and holes in floors, walls & celings
- Easily workable thixotropic mix
- Install floorcoverings after 4-6 hours
-
Add to cart
- Size: 20Kg
- Max Thickness: 1mm-10mm
- Coverage: 1m2 at 12mm
- Fast hardening levelling and smoothing compound used in interiors on new and existing substrates prior to the installation of carpet, vinyl or ceramics where resistance to heavy loads and traffic is required.
- For use on concrete slabs and cement-based screeds, existing ceramic tiles, terrazzo and natural stone floors. Strong enough to withstand wheel traffic and can be applied in thicknesses up to 10mm per single coat.