Filter Products
-
Add to cart
- Size: 20Kg
- Coverage: 1m2 at 10mm
- Ready to use, normal setting, controlled shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. Mix 1 x 20kg bag of Topcem Pronto with approximately 1.4 litres of water. Workability time of 40-60 minutes and light foot traffic after 12 hours.
- Ready for resilient and timber flooring installation after 4 days
-
Add to cart
- Size: 20Kg
- Coverage: 1m2 at 10mm
- Pre-blended, mortar for ready-to-use, quick setting and drying (24 hours), controlled shrinkage screeds. Mix 1 x 20kg bag of Mapecem Pronto with approximately 1.5-1.7 litres of water.
- Workability time of 20-30 minutes and light foot traffic after 2-3 hours. Ready for resilient and timber flooring installation after 24 hours
-
Add to cart
- Size: 20Kg
- Max Thickness: 15mm-50mm Bonded, 40mm-70mm Unbonded
- Pre-mixed and ready to use
- Rapid set cement screed preparation with Ardurapid fast dry technology. Designed for all types of floor coverings. Unbonded at least 35mm, and preferably 40mm thick. Maximum thickness is 70mm.
- Heated floors normally require greater than 45mm thick. Bonded screeds it must be at least 15mm and a maximum of 50mm
-
Add to cart
- Size: 20Kg
- Max Thickness: 15mm + Bonded, 35-40mm unbonded
- Coverage: 1m2 at 10mm
- Designed to be mixed with forced actioned Soroto mixer with desired aggregate
- Ardex A38 produces a screed that improves on-site efficiencies by allowing traffic shortly after application and laying of the floor covering on the same day
-
Add to cart
- Size: 20Kg
- Max Thickness: 10mm-100mm
- Coverage: 1m2 at 10mm
- Fast hardening levelling smoothing compound for thicknesses from 10mm to 100mm. Especially recommended for pumping. Used in interiors as a bulk-filling underlayment compound. Smoothing for underfloor heating systems
- When mixed with water, UC Leveller Maxi becomes a very fluid, easy to apply mix that has excellent self-levelling properties and cures rapidly. Flooring can be installed after approximately 24-72 hours
-
Add to cart
- 🔸Size: 20Kg
- 🔸Max Thickness: 1mm to any depth. Can be bulk filled using 2-5mm aggregate
- 🔸Coverage: 13m2 at 1mm
- 🔸Ultra rapid drying – ready to receive vinyl after 60 minutes
- 🔸Easy to install – 1mm to any thickness in one application
- 🔸Suitable for residential and commercial applications
- 🔸Excellent for areas subjected to high stress environments
-
Add to cart
- Size: 20Kg
- Max Thickness: 1mm-10mm
- Coverage: 1m2 at 12mm
- Fast hardening levelling and smoothing compound used in interiors on new and existing substrates prior to the installation of carpet, vinyl or ceramics where resistance to heavy loads and traffic is required.
- For use on concrete slabs and cement-based screeds, existing ceramic tiles, terrazzo and natural stone floors. Strong enough to withstand wheel traffic and can be applied in thicknesses up to 10mm per single coat.