Filter Products
-
Add to cart
- 🔸Size: 20Kg
- 🔸Max Thickness: 1mm to any depth. Can be bulk filled using 2-5mm aggregate
- 🔸Coverage: 13m2 at 1mm
- 🔸Ultra rapid drying – ready to receive vinyl after 60 minutes
- 🔸Easy to install – 1mm to any thickness in one application
- 🔸Suitable for residential and commercial applications
- 🔸Excellent for areas subjected to high stress environments
-
Add to cart
- Size: 20Kg
- Max Thickness: 1mm-10mm
- Coverage: 1m2 at 12mm
- Fast hardening levelling and smoothing compound used in interiors on new and existing substrates prior to the installation of carpet, vinyl or ceramics where resistance to heavy loads and traffic is required.
- For use on concrete slabs and cement-based screeds, existing ceramic tiles, terrazzo and natural stone floors. Strong enough to withstand wheel traffic and can be applied in thicknesses up to 10mm per single coat.
-
Add to cart
- Size: 20Kg
- Max Thickness: 3mm-40mm
- Coverage: 1m2 at 12mm
- Fast drying interior levelling and smoothing compound from 3 to 40mm per pour. Specifically formulated for interior use by trade professionals. For thicknesses greater than 40mm, it is recommended to add up to 50% of graded aggregate from 2-5mm
-
Add to cart
- Size: 20Kg
- Max Thickness: 3mm-70mm
- Coverage: 1m2 at 10mm
- Fast hardening levelling smoothing compound for thicknesses from 3mm to 70mm. Especially recommended for pumping. Can be used in interiors as bulk filling underlayment compound. Smoothing for underfloor heating systems.
- When mixed with water, UC Leveller becomes a very fluid, easy to apply mix that has excellent self-levelling properties and cures rapidly. Flooring can be installed after approximately 24-48 hours.
-
Select options
- Sizes: 4L, 20L
- Max Thickness: Wet Film Thickness of 0.3mm (1 coat)
- Coverage: Primer or efflorescence barrier: 60m2/20L kit, 12m2/4L kit (1 coat). Moisture Barrier: 30m2/20L kit, 6m2/4L kit (2 coats)
- Can be applied to damp surfaces. AS4020:2000 Potable Water Approved. Hydrostatic pressure resistant waterproof membrane. Prevents rising damp and formation of efflorescence.
- Water based- safe to use in sensitive locations. Green Star - meets the benchmark for VOC credit in the Green Building Council of Australia's Rating Tools
-
Add to cart
- 🔸Size: 20Kg
- 🔸Max Thickness: 1mm-10mm
- 🔸Coverage: 1m2 at 12mm
- 🔸Self-levelling, ultra quick hardening smoothing compound for thicknesses from 1 to 10mm
- 🔸20-30 minutes of workability time
- 🔸Able to receive light foot traffic in 3 hours and ready for resilient and timber flooring installation in 12 hours
- 🔸Internal only
-
Add to cart
- 🔸Size: 20Kg
- 🔸Max Thickness: Feather Edge to any depth
- 🔸Coverage: 4m2 at 3mm
- 🔸Extremely versatile and is suitable for a wide range of substrates. Can be bulk filled using 2mm-5mm aggregate
- 🔸Hardens quickly and achieves high early strength. It will not shrink or spall, even when applied in thick layers.
- 🔸Walkable after 2 hours and most floor coverings can be installed 16 hours later at 20°C.
-
Add to cart
- 🔸Size: 20Kg
- 🔸Max Thickness: 2.5mm-12mm
- 🔸Coverage: 4m2 at 3mm
- 🔸Super smooth – requires no sanding
- 🔸Versatile – apply 1.5mm to 35mm in one application
- 🔸 Once dry it is suitable for the application of vinyl, carpet and tile floor finishes
- 🔸Unlike normal hydration levellers, Ardex K 12 new will harden and dry at temperatures down to 10°C
- 🔸Rapid hardening – walkable from 2 hours