Filter Products
-
Add to cart
- Size: 300ml
- Spread Rate: 13 lineal metres at 5mm x 5mm
- 20 units sold separately in a carton
- Has a degree of flexibility, is water resistant and can be paintable. Ultragrip ages extremely well when used in typical applications and conforms to AS 2329
- Will bond successfully to a wide range of commonly used building materials such as brick, concrete, timber, metals
- It is used for the installation of wall and floor panels, bonding timber, cement and plaster sheets to timber and metal joists or studs
-
Add to cart
- - Size: 500ml
- - Spread Rate: Up to 250lm
- - 12 units sold separately in a carton
- - Polyurethane based construction adhesive ideal for bonding carpet gripper & metal trims
- - To speed up curing time, wipe damp rag to surface prior to applying adhesive. Less is more
- - Excellent resistance to high temperatures and water
-
Add to cart
- Size: 20L
- Spread Rate: Up to 10m2 /L per surface
- Gives strong adhesion to a wide range of materials including decorative plastic laminates, timber and timber composites, many natural and synthetic rubbers, cementitious composites and polyurethane foam
- Specifically designed for easy spraying without cob webbing, especially where automatic spraying equipment is employed.
-
Add to cart
- Size: 20L
- Spread Rate: 6-8m2 /L (120-160m2 P/PAIL)
- High quality spray contact adhesive
- Designed for use on vinyl and PVC skirtings & extrusions, coverstrips, plastic and metal treads nosings, decorative Laminates, MDF, wood most common building substrates
- High strength, excellent ageing and heat resistance
-
Add to cart
- Size: 20L
- Spread Rate: 5-7m2 /L (100-140m2 P/PAIL)
- Rapid drying solvent contact cement
- Suitable for bonding vinyl and PVC skirtings & extrusions, coverstrips, plastic and metal treads nosings, decorative Laminates, MDF, wood and wood Veneer, paper honeycomb to steel, timber, concrete, plasterboard and most common building substrates.
- High strength, excellent ageing and heat resistance.
-
Add to cart
- Size: 20Kg
- 1.5Kg/m2 per mm of thickness
- Waterproofing for indoor floor and water surfaces that are not continuously immersed in water or subject to rising damp. Flexible, anti-fracture membrane.
- Apply before the installation of ceramic tiles or stone material. MapeGum WPS is a ready-to-use, solvent-free, one-component, grey-coloured paste with a base of synthetic resins in water dispersion
-
Add to cart
- Size: 15Kg
- 1.3Kg/m2 per mm of thickness
- Ready to use, ultraquick drying, flexible liquid membrane for internal and external waterproofing applications.
- The flexible nature of Mapelastic AquaDefense helps to withstand normal movements caused by expansion and shrinkage of the substrate due to temperature variations and vibration
-
Select options
- Size: 4L, 15L
- Max Thickness: Total dry film thickness of 0.5mm (2 coats)
- Coverage: Floors: 8.7m2 (2 coats) D.F.T - 1.0mm Walls: 17.5m2 (2 coats) D.F.T - 0.5mm
- Express dry time with bathroom tiling possible in just 4 hours, with no risk to corners and junctions. Crack isolation protection over shrinkage, hairline and other non-structural cracks. Tough flexible film.
- Meets Green Building Council of Australia Greenstar requirements IEQ-13, IEQ-11. Can be tiled over - good adhesion with Ardex tile adhesives. STB Tape eliminates need for bond breaker. Class III Membrane, as per AS/NZS 4858 Wet Area Membranes
Cementitious MaterialsArdex WPM155 Rapid Plus High Performance Undertile Waterproofing Membrane
-
Add to cart
- Size: 4Kg
- Consumption: 0.2-0.3kg/m2
- Two-component, solvent-free, 100% solid epoxy primer for consolidating and waterproofing cementitious substrates. Application prior to the installation of flooring sensitive to moisture and to alleviate moisture related problems of concrete or cementitious screeds. Can be applied to substrates up to 100% RH